Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225

Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225
Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225
Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225
Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225
Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225
Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225
Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225
Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225

Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225

Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225. These Brake Discs are Geomet coated to help prevent rust. Dimpled and Grooved Performance Brake Discs. These are a firm favourite for many of our customers with the classic drilled and grooved appearance but without the pitfalls of having a through drilled disc or more commonly described as cross drilled disc. Cross drilled discs allow channelling of hot gasses into the tunnel section of the brake discs in aid to assist the cooling of the discs, however for most brake discs this has a serious flaw resulting in hot spot surrounding the holes often resulting in cracking originating from the holes.

Our Dimpled and Grooved discs overcome this problem and offer additional reliability over cross drilled discs, the dimples work in much of the same way allow gasses to sink into the small pockets and immediately escaping once the pocket has passed the pad surface, the grooves also carry out the same task but also help to de-glaze your brake pads and assist with parallel brake pad wear. As a world leader in braking technology Brembo don't need much of an introduction, Brembo are the original equipment manufacturers for the worlds most prestigious vehicles from executive saloons to Formula One race cars. When you choose Brembo brake pads you can be confident you are fitting a brake pad manufactured to the highest quality that will provide you with safe braking under all road conditions. Below are the product item particulars, please check that the information below meets your requirements.

Placement on Vehicle Front, Left, Rear, Right. Brake Disc Diameter (mm) 320/280.

Brake Disc Type Internally Vented/Solid. Disc Thickness New (mm) 25/11. Disc Thickness Minimum (mm) 23/9. Stud Hole PCD (mm) 108.

Height of Brake Disc (mm) 49/41. Year and Month From 2005. Year and Month To 2010. Credit or Debit Cards exc.

As brake discs are manufactured from cast iron they will naturally oxidise (rust) when exposed to moisture, this process will happen with days and is perfectly normal although this doesn't look pretty the function of the discs will not be effected. Some of our brake discs however are now being supplied with a protective coating, this may be in the form of a Geomet coating or special paint, this process is happening based on stock rotation from our suppliers. Please provide your vehicle registration number when ordering so we are able to verify you have ordered the correct part for your vehicle, we may also contact you for additional information when your registration number provided size options or variations. Failure to provide your registration number or reply to our messages will delay your order.

The item "Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225" is in sale since Wednesday, July 13, 2016. This item is in the category "Vehicle Parts & Accessories\Car Parts\Brakes & Brake Parts\Brake Discs". The seller is "brake-depot" and is located in Chesterfield. This item can be shipped worldwide.


Focus ST 2.5 Coated Brake Discs and Brembo Pads Front Rear Dimpled Grooved 225