Electric Scooter Power-Off E-Bike Hydraulic Disc Brake Right Set 140 160 180mm. NUTT Electric Scooter Hydraulic Disc Brake Right Set 140 160. 180mm Power-Off With HS1 Rotor For Kugoo G2 Pro M4 M5. About the model of the scooter? Suitable for:Kugoo G2 Pro / Kugoo m4 Pro /Kugoo m5 Pro ----However, the scooter of KuGoo G2 Pro needs to be equipped with gasket before the brake can be installed normally.---If the brake kit you receive is not suitable, please do not dispute and contact customer service to solve it first. Thank you for your understanding. ---For other scooter models, please contact customer service and send photos of the scooter.
Because the brake lever and the tubing are separated, so you can install the brake lever according to the control direction you want : right brake lever control front left rear, left front right rear, it can be. The front brake oil tubing length is 1.35m, rear brake oil tubing lrngth is 2m, --The tubing length of this brake kit has changed. Please refer to this information. The default wire is a waterproof interface===JULET 2 pin connector (male). The default is 30 cm.
If yours is e- bike, When purchasing, please leave a message: e-bike --If yours is e- scoter, When purchasing, please leave a message about your scooter model in the order! Applicable to most bicycle brakes, if your's is a e-bicycle, The front and rear brakes are on the left side. The brake kit is mainly compatible with KUGOO G-Booster and the same mounting direction and Angle (see the details below). --(Not suitable for scooter installation on the right side of rear wheel) ---(Some scooters need to be installed with gaskets, we do not provide this kind of gaskets, please solve by yourself). In addition to being suitable for E-bike, it is also suitable for the following models of scooters.
KUGOO G-Booster / KUGOO ES3 / dualtron ultra / dualtron eagle pro / Ultron t11 / FLJT113 / Speedway 5. About other electric scooter models? Otherwise, we will not be responsible for your order.Don't rush to initiate a dispute, thank you. Because the brake lever and the tubing are separated, so you can install the brake lever according to the control direction you want : right front left rear, left front right rear, it can be. The front brake length is 1.25m, the rear brake length is 2.2m. If you also need to replace the (female) JULET 2 pin connector on the scooter. The caliper contains original brake pads.
Not all front wheel brakes of scooters are suitable, please refer to the following conditions. If your scooter is not the following type, and you do not consult us before purchasing, we will not be responsible for your order. Model can refer to :KUGOO G- booster. Note: the front and rear brakes are on the left?
Our goal is your satisfaction. If you like our products.Our goal is to provide first class customer service so we will try our best to resolve any problem. Monday to Saturday Beijing time 9:00 a. We will reply you within 24 hours. This item is in the category "Sporting Goods\Cycling\Bike Components & Parts\Brakes". The seller is "rainxia2020" and is located in this country: CN. This item can be shipped worldwide.