This is also a major reason to opt for the option dimpled and grooved over drilled and grooved. We do agree the drilled and grooved option would have cooled the brake disc temperatures more efficiently, But that is not something we can afford to risk. The reason for this is, if we drill holes in the brake disc surface we cause a risk of the brake discs cracking from the drill holes. We have countered this feature to cool the brake discs efficiently by benefiting the discs with pillar venting technology.This will help control and keep brake temperatures low efficiently Kinetix brake discs and Brembo Pads Setup Axle: Front + Rear brake set up Front Disc Part no: TX066 Front Disc Diameter: 324mm Front Disc Thickness: 30mm Front Disc Type: Painted Silver Front Disc Style: Dimpled and Grooved Front Brembo Pads Rear Disc Part no: TX046 Rear Disc Diameter: 322mm Rear Disc Thickness: 22mm Rear Disc Type: Painted Silver Rear Disc Style: Dimpled and Grooved Rear Brembo Pads Dimpled & Grooved : The key benefits of the dimpled and grooved discs are that brake fade is significantly reduced. The science behind this brake style is the dimples and grooves deglaze the pad and vents gasses that build up between the disc and the pad during braking. The additional slots (vents) dissipate heat more effectively, thus greatly reducing the risk of deformation, vibration of the disc at extreme operating temperatures. Silver Coating : All Kinetix sports discs are Painted Silver to prevent the discs from corrosion in areas not swept by the brake pad. Optimum brake performance is realised after the zinc coating has been removed from the pad track area, which can take up to 100 miles. It is normal that a small amount of noise is exhibited from Kinetix slotted rotors when they are first applied. This noise gradually diminishes and at around 1,000 miles of road use the noise will be minimal. CNC Machined : For consistently high standards and identical specification, this disc is manufactured using the latest CNC technology. Electronically Balanced: This disc is electronically balanced and where necessary adjusted to eliminate brake judder. Precision Finished: This disc's braking face is precision engineered to help bed in new discs and pads and eliminate pedal bounce.
Original Specification: All brake discs are manufactured to original equipment specification and comply to. BEFORE PURCHASING WE RECOMMEND CONTACTING US WITH YOUR REG NUMBER SO WE CAN CHECK FITMENT. THIS WILL AVOID ANY DISAPPOINTMENT OF RECIEVING INCORRECT PARTS. We make every effort to deliver goods within the estimated timescale. However delays are occasionally inevitable due to unforeseen circumstances.We recommend you do not book your vehicle in for any repairs until you physically have the part to save on any disappointment caused by delays. Azcarparts Wakefield will be under no liability for any costs on damages or expenses caused by any delays. The item "For Nissan 350z 350 z roadster G35 front rear grooved brake discs brembo pads" is in sale since Thursday, January 30, 2014. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Performance Braking\Performance Brake Discs". The seller is "atozwakefield" and is located in WAKEFIELD.
This item can be shipped worldwide.