Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit

Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit
Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit
Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit
Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit
Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit
Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit

Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit
Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit. The inside diameter of this rotor will accept an axle flange that has a diameter of 6-1/4 or smaller. If your axle flange exceeds 6-1/4 in diameter, you will need machine your axle flange to decrease your axle flange diameter to fit this rotor as necessary. When utilizing an aftermarket axle with disc brake conversion kits, it may be necessary to reduce the diameter of the axle flange to a diameter necessary to adequately fit inside the required Clearance I. That the brake hat/brake rotor will require. (see above diagram for illustration). If you dont want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4 vented rotors, 78-88 GM metric style calipers, brake pads and hardware. Fits both 5 on 4-1/2" and 5 on 4-3/4" bolt circles. For Ford passenger car axles ONLY. Fits axle with maximum flange diameter of 6-1/4 O. For 15 and larger wheel applications ONLY. NOTE: This bolt on brake kit is designed to be used on 8" and 9" housings using 3/8 retaining bolts.

If you want to use it on a 9" housing with 1/2" bolts, you will need to use the 3/8 hardware to do so. Fits "old" and "new" style big bearing 3.150 bearing O. Ford housings and with axle offsets of a minimum 2-3/8" to 2-1/2". Axle Flange Identification Chart (GIF).

"Old-style" big bearing 9 Ford axle. "New-style" big bearing 9 Ford axle. Axle housings with minimum axle offsets of 2-3/8" to 2-1/2". The exception would be the late 50's station wagon rear ends. When using with a Currie Axle with an o/d register of 2.795", the rotor is included in this kit with an i/d register of 2.78" and therefore will need to be machined by increasing the hole diameter in the rotor to match the Currie axle spec of 2.795.

Works with 8" Ford and new and old style big bearing Ford 9" using 3/8 retaining bolts. Ford inch rear disc brake kit. By Shawn on December 26, 2018.

Kit was complete and ready to go. You will have to "clean up" the hole a bit if you want them to fit over speedways/Curries 9+ axles. Use a stone bit and just hit them it will work fine. Do not use a carbide bit it will cut to fast. When building custom hot rods it's important to remember EVERYTHING needs to be fit.

Yes, I recommend this product. By Chuck on July 31, 2018. The directions were difficult too understand as well as photographs were hard to see and figure out.

But i got it after trial and error. By Tank on November 15, 2017.

By 68e on October 16, 2017. This a good way to install rear disc system if you do not have the ability to weld on caliper brackets. All of the parts are there but needs better instruction sheet. I did get it all figured out, but plan twice as long to do it..... By Jim dandy on September 26, 2017.

The product is very good. The instructions were very helpful. I would suggest adding the flex lines to the kit as I spent half a day going from one parts supply to another.

Looking for flex lines not knowing exactly what the brakes are. I ended up ordering them from you. Thanks alot they work great! I could have paid less online, but I have always been happy with your parts and service. Related Items / Suggested Parts.

Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake. T-Bolt Kit w/ Nuts for Ford 9 Inch Rear End Housings. Speedway 8 & 9 Inch Ford Disc Brake Conversion Kit w/ E-Brake. Dot Braided Stainless Brake Hoses, GM/Ford, 7/16-20 Rear. Redline 80402 CV-2 Synthetic Grease. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 67 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice.

Speedway accepts full responsibility for the accuracy of our listings and product representation. The item "Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit" is in sale since Tuesday, November 20, 2018.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Brakes & Brake Parts\Discs, Rotors & Hardware". The seller is "speedway_motors" and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Monaco, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
Speedway Ford 9 Inch Rearend Bolt-On Rear Disc Brake Kit